PRODUCTS

UViGlo™ GLOSS UV-cure Coating

Above: anilox-equipped roll coater typically used to apply UViGlo UV-cure coatings from Kerley Ink.

UViGlo GLOSS is a UV-curable mirror-finish, roller applicator-applied coating. UViGlo GLOSS cures to a clear, water-white, glossy finish due to Kerley's exclusive use of our non-yellowing Exocure BPW photoinitiator package. Cure is instant and hard enough to be scuff-resistant.

UViGlo GLOSS coating cures to a very tough, flexible film and can be used for a variety of applications such as brochures, catalogs and folding cartons. Adding 1-3% percent of Kerley's Exocure BPW liquid photoinitator enables UViGlo GLOSS to be used as a wax-free high speed web offset coating as well.

UViGlo GLOSS coating requires the use of an absorbent substrate like paper or board stocks, a primer coat, or a surface treatment to increase surface energy on non-absorbent substrates (ie: plastic) in order to ensure excellent adhesion.

Hot foil stamping will adhere to UViGlo GLOSS coating.


UViGlo GLOSS coating is produced ITX-free. Contains Benzophenone.

Packaging Options:
1 Gal Jug
1 Gal Jug

1 Gallon Plastic Jug with Wide-Mouth Cap

press to zoom
3.5 gallon Bucket
3.5 gallon Bucket

3.5 gallon resealable plastic bucket (net 30 lbs)

press to zoom
5 Gallon Bucket
5 Gallon Bucket

5 gallon plastic bucket with optional pour spout (40-45 lbs)

press to zoom
55 gal logo straight drum
55 gal logo straight drum

55 gallon straight sided steel drum (net 400-450 lbs) with bolt-lock ring

press to zoom
275 gal IBC Tote
275 gal IBC Tote

275 Gallon IBC tote bin (net 2000-2200 lbs)

press to zoom