top of page

Impression Process


Dry/Set Tech

Air Dry

Formula Base



Corrugated Board

AquaMax™ C 100

 4-Color Process, Mixing, & Spot Colors

AquaMax™ C 100 series water-base flexo inks are optimized for corrugated and paper stocks running on <100-180 LPI (>9 BCM) anilox roller-equipped flexographic presses. Use of AquaMax™ C 100 is not recommended for non-absorbent substrates and plastic films. AquaMax™ C 100 series inks are well pigmented, color strength-balanced, press-ready base mixing inks, and are part of a complete blending system that is suitable for automatic ink dispensers. 

Kerley Ink has designed AquaMax™ inks to be considerably more stable in-fountain than the majority of water-based flexo inks in the market by integrating a very forgiving amine neutralizing system for longer runs between pH adjustments. In addition, all AquaMax™ C series inks are relatively free of mineral fillers like clay extenders, so color strength and print fidelity are optimized.


AquaMax™ C 100 inks are formulated to be very cost-effective yet optimized for best performance.


Like many other Kerley Ink products, AquaMax™ can be fine-tuned in strength and viscosity for your press on a special-need basis….also AquaMax™ bases can be pre-blended to hundreds of new colors direct from Kerley Ink. 

Have it your way!

Want to know more about this product?

Base Mixing Colors

Spot Colors 'pre-blends' available (conditions may apply)

Packaging Options
bottom of page