Utiligel™ FAST LT hi-gel heatset web offset Vehicle
A very large range of ink vehicles is made by Kerley Ink. We have what you are looking for...
Utiligel brand heatset letdown vehicle is called the "Web Offset Workhorse" for one major reason: it is the one vehicle you'll need to produce just about any low- or mid- tack web offset heatset ink you can think of. Utiligel FAST LT excels at producing low- & mid-tack heatset ink formulas.
Utiligel's uniqueness stems from its simple formula. Consisting of hard, high-melt gelled resin and a wide-range blend of heatset solvents for extra on-press stability, Utiligel has only minimal plasticizers, modifiers, or vegetable oils. Thus, Utiligel FAST LT maximizes drying performance without hurting any other important properties such as water pickup or scuff resistance. Consider using Utiligel FAST LT when press speeds run from 1500-3000 FPM (500-800 Meters/Min). Utiligel FAST LT is good for developing low-misting inks, also.
Most importantly, Utiligel FAST LT features high viscosity with a moderate tack (under 20 points @ 1200 RPM, Thwing-Albert Model 101). You can make inks with a tack as low as 6 points @ 1200 RPM that still "hold up" under high shear.
Tack: 11 points @ 400 RPM @ 90 F
Viscosity (Laray): 600 Poises/12,000 Dynes/sqCM Yield @ 40 C
Resin Type: Rosin/Hydrocarbon-based 150C MP
Solvent Percentage: <43%
Solvent Boiling range: 375- 750°F
Soy/Vegetable Oil content: <1%
3.5 Gallon Plastic Bucket (net 30 lbs)
5 gallon plastic bucket with optional pour spout (40-45 lbs)
15 Gallon Steel Drum / Kit (110-135 lbs net)
55 gallon straight sided steel drum (net 400-450 lbs)