OmniSperse™ ECO Dispersing/Grinding Vehicle

Omnisperse ECO is our 100% solids dispersion vehicle that can be used to grind as much as 45% pigment into a pigment predispersion suitable for making most types of offset inks, including heatset, business forms, quickset and high-quality newsinks.


Omnisperse ECO gets its superior pigment-wetting characteristics from controlled selection of low acid number resins and alkyd resins to give good dispersion characteristics without compromising ink/water balance. High melt point phenolic resin is also employed to give very rapid setting characteristics to inks made using Omnisperse.

Omnisperse ECO contains 64% bio/renewable ingredients.

Omnisperse ECO also exhibits very low color, so delicate shades can be obtained easily with Omnisperse ECO. Omnisperse ECO can be used to make "dry grinds" of pigments to be used for both quickset and heatset inks.


Tack: 5 points @ 400 RPM @ 90 F

Viscosity (Cone & Plate): 38 Poises, Yield 300 Dynes/CmSq @ 40 C

Resin Type: Rosin Modified Phenolic 160C Melt Pt, Long Oil Linseed Iso-Alkyd

Solvent Percentage: 0%

Solvent Boiling Range: N/A

Bio/renewables content: 64%

OmniSperse™ vehicle is a color-controlled fluid of relatively low viscosity. It is intended for use as a dispersing/grinding vehicle for all litho inks except energy-cured formulas.

Packaging Options:
3.5 Gallon Plastic Bucket
3.5 Gallon Plastic Bucket

3.5 Gallon Plastic Bucket (net 30 lbs)

5 Gallon Plastic Bucket
5 Gallon Plastic Bucket

5 gallon plastic bucket with optional pour spout (40-45 lbs)

15 Gallon Metal Drum
15 Gallon Metal Drum

15 Gallon Steel Drum / Kit (110-135 lbs net)

55 gallon straight side drum
55 gallon straight side drum

55 gallon straight sided steel drum (net 400-450 lbs)