LumaFlex™ GP 35 HI FLOW Process Yellow 14
A very large range of pigment dispersions is made by Kerley Ink Above, rubine red pigment is being milled. We have what you are looking for in colorants for many different inks...
LumaFlex™ GP 35 HI FLOW Yellow 14 is a radiation-curable dispersion of 35% AAMX yellow (Pigment Yellow 14) in a mixed oligomer system. This high-flow, low viscosity fluid vehicle system has been optimized for use with paper and board, with possible applications with some surface-treated or oxidized films as well. Recommended dosage of LumaFlex™ GP 35 HI FLOW Yellow 14 is 45%-65% by weight in a finished ink. LumaFlex™ GP series energy-curable bases feature soft easy-to-handle viscosity with excellent pigmentation levels.
Typically used to make Process MaYellowgenta inks, 45% to 65% of LumaFlex GP 35
yellow 14 by total formula weight is considered a normal loading for most liquid flexo & gravure ink formulas. Excellent results for coated and uncoated stock flexographic & gravure ink formulas can be obtained by blending LumaFlex GP dispersions with LumaFlex composite letdown varnish.
Chemical Resistance: 5% HCl: Excellent 5% NaOH: Excellent
Bleed Resistance: Water: Excellent Ethanol: Very Good Hot Paraffin: Very Good Soap: Very Good Lacquer Solvents: Fair Linseed Oil: Excellent Diethylene Glycol: N/A Mineral Spirits: Excellent
Lightfastness: Full Strength: Fair Tint: Poor
Pigment type: AAMX Yellow 14
Color Index No: 21095
Pigment Content: 35%
Solvent Content: 0%
Solvent Boiling Range: N/A
Bio/renewables content: 11.2%
Vehicle type: UV- or EB-cure acrylic esters & epoxies
Appearance: Thin yellow paste
3.5 Gallon Plastic Bucket (net 30 lbs)
15 Gallon Steel Drum / Kit (110-135 lbs net)
55 gallon straight sided steel drum (net 400-450 lbs)