Formsmaster Extender ECON LZR is used in the manufacture of petroleum/vegetable oil-based business forms inks that need to be compatible with laser printers. 

 

Formsmaster Extender ECON LZR is a high vegetable oil content product (35%), plus it contains 20 percent Linseed oil for harder dry back than non-last forms inks. Formsmaster Extender ECON LZR is also nearly 100 percent solids. It is also used as a transparent white extender for making tints. 

Formsmaster Extender ECON LZR is drier-reactive, making it an ideal vehicle from which to make tougher-drying laser inks. 1% of cobalt drier (based on 6% metal content) would be adequate for making air-drying inks that could be printed in less than 96 hours.

 

As with all Kerley laser-compatible products, printers must be advised that printed material must be left to air dry with adequate windage (air exchange). Shrink-wrapping of printed material is strongly discouraged. Use of non-absorbent stocks will also cause product performance problems. A minimum of 96 hours drying time is suggested before printing with laser printers should occur.

​

Formsmaster Extender ECON LZR contains 4% bio/renewable ingredients.

​

​

SPECIFICATIONS:

Tack: 9 points @ 400 RPM @ 90 F

Viscosity (Laray): 220 Poises/4000 Dynes/sqCM Yield @ 40 C

Resin Type: Rosin-Modified Phenolic 155C Melt Pt

Solvent Percentage: 0.5% 

Solvent Boiling Range: N/A