ThermaGard™ HG WF Gloss Heatset OPV (Wax-free)
Above: the delivery end of a high-speed heatset web offset printing press. This is the area of a web offset press where the performance of an overprint varnish (OPV) is most critical. Count on Kerley Ink for superior protection here!
ThermaGard DULL heatset overprint varnish is Kerley's wax-free premium, super low-gloss overprint varnish.. ThermaGard HG WF DULL does not contain PTFE or any other wax, so dried films have fair scuff & burnish resistance right from the delivery end of the press. ThermaGard HG WF DULL formulated to be used in the press fountain, just like an ink. This means that ThermaGard HG WF DULL varnish can also be used a “spot” varnish for selective application of varnish on the printed sheet.
ThermaGard HG WF DULL also contains Tung Oil (aka: Chinawood Oil), enabling the film to continue to air-cure after heat-setting to a very hard, yet flexible and more chemically-resistant film.. ThermaGard HQ WF Gloss OPV does accept lamination or stamping readily. ThermaGard HG WF DULL, when properly applied and adequately air-cured, is capable of withstanding rub tests of several dozen strokes, especially if a small amount of drier such as our “Litho Dri CO 6” is added press-side. Contains silica, which must be stirred from the bottom of any container before usage.
ThermaGard HG WF DULL contains 41% bio/renewable materials.
3.5 gallon resealable plastic bucket (net 30 lbs)
5 gallon plastic bucket with optional pour spout (40-45 lbs)
55 gallon straight sided steel drum (net 400-450 lbs) with bolt-lock ring
1000 Liter Spacekraft tote bin (net 2000-2200 lbs)
280 Gal, Steel Body, Net 3000 lbs, pressurized