top of page

PRODUCTS

Soytex™ Extender LZR Laser forms Extender
Soybeans Soya Beans

Soybeans: prior to crushing and oil extraction

Soytex Extender LZR is used in the manufacture of soy oil-based business forms inks that need to be compatible with laser printers. Soytex Extender LZR is a high soy oil content product (35%), plus it contains 20 percent tung oil for extra hard dryback. Soytex Extender LZR is also 100 percent solids. It is also used as a transparent white extender for making tints. 

Soytex Extender LZR is very drier-reactive, making it an ideal vehicle from which to make ultra fast-drying laser inks. 1% of cobalt drier (based on 6% metal content) would be adequate for making air-drying inks that could be printed in less than 72 hours. As with all Kerley laser-compatible products, printers must be advised that printed material must be left to air dry with adequate windage (air exchange). Shrink wrapping of printed material is strongly discouraged. Use of non-absorbent stocks will also cause product performance problems. A minimum of 72 hours drying time is suggested before printing with laser printers will occur.

SPECIFICATIONS:

Tack: 7-8 points @ 400 RPM @ 90 F

Viscosity (Laray): 190 Poises, 4,400 Dynes/CMsq Yield value @ 40 C

Resin Type: Rosin-Modified Phenolic 155C Melt Pt

Solvent Percentage: 0% 

Solvent Boiling Range: N/A

Soy Oil Content: approx 35%

Total Vegetable Oil Content: 58%

Packaging Options:
bottom of page