top of page

Impression Process

Sheetfed Offset

Dry/Set Tech

Conventional UV Lamp

Formula Base

Acrylate-based

Substrates

3-piece can, Tin plated steel, sized steel sheet, aluminum sheet, select plastic sheets, and polymer-resin surfaces

Flexo Flexeon F800 Substrate.png

Flexeon™ F 800

 4-Color Process

Flexeon™ F 800 series press-ready inks are our premium water-base flexo inks that are optimized for film, foil and non-absorbent stocks running on 700-1200 LPI (1-2.9 BCM) anilox roller-equipped flexographic presses. Use of Flexeon™ F 800 is recommended for non-absorbent substrates and oxidized/surface treated plastic films (i.e. treated polyethylene, BOPP, PETE, foil coated films). However, it is possible to use Flexeon™ F 800 on paper and board substrates with high LPI anilox presses as well. Flexeon™ F 800 series inks offer superb adhesion to non-absorbent substrates, are very strongly pigmented and trap well for high-resolution 4-color process printing.

Kerley Ink has designed Flexeon™ inks to be considerably more stable in-fountain than the majority of water-based flexo inks in the market by integrating a very forgiving amine neutralizing system for longer runs between pH adjustments. In addition, all Flexeon™ inks are free of mineral fillers like clay extenders, so color strength and print fidelity are optimized. Scuff resistance is usually excellent and Flexeon™ will often pass tape pull tests where other brands will not.

 

For mixing bases see our Flexeon™ FCS 800 series.

Like many other Kerley Ink products, Flexeon™ can be fine-tuned in strength and viscosity for your press on a special-need basis. 

Have it your way!

Want to know more about this product?

Inquire
Process Color (4-Color, CMYK) Options
Packaging Options
bottom of page