Send me more info about this product...
Send me more info about this product...
PRODUCTS
AquaMax™ P 400 Water-Base Flexographic Inks
Send me more info about this product...

AquaMax P 400 series water base flexo inks are optimized for paper, board and envelope stocks run on 360-500 LPI (3.6-2.5 BCMs) anilox roller-equipped presses. AquaMax P 400 is not recommended for non absorbent substrates and plastic films. AquaMax P 400 series inks are 25% more strongly pigmented than AquaMax P 200 base inks, and are part of a complete blending system. They contain a very forgiving amine neutralizing system for longer runs between pH adjustments. For less than 360 LPI anilox systems, please use our AquaMax P 200 press-ready water flexo inks.
Like many other Kerley Ink products, AquaMax can be fine-tuned in strength and viscosity for your press on a special basis…or AquaMax P 200 or P 400 bases can be pre-blended to hundreds of new colors. Have it your way!
AquaMax™ is furnished as press-ready ink and is available in the following base colors:
• Neutral Mixing Black
• Process Black (toned bluer)
• Process Blue
• Phthalo Green
• Rubine Red/Process Red
• Rhodamine Red
• Process Yellow
• Purple
• Reflex Blue
• Violet
• Warm Red
• Transparent Extender
Packaging Options:


3.5 gal bucket with optional pour spout (30lbs)

5 gallon plastic bucket with optional pour spout (40-45 lbs)

55 gallon straight sided steel drum (400-450 lbs)

275 Gallon IBC tote bin (2000-2200 lbs)